Revival Signature Complete mo.Unit Blue Installation Bundle
8 Reviews Regular price $564.00Need an easy button for your Motogadget mo.Unit install? Look no further. Our Complete mo.Unit Installation Bundle has everything you'll need to install a new mo.Unit on your bike at a professional level.
On top of that, we offer unmatched technical support on all Motogadget gear, so if you hit any snags along the way, don't sweat it.
Motogadget mo.Unit Specifications:
The mo.Unit Blue (m-Unit Blue) packs an unbelievable amount of tech into a tiny package with a footprint smaller than the average smartphone. At its core, a solid-state microcontroller and fuse block replacement manages your bike's vital functions while providing a self-correcting monitoring system for electrical faults. In addition, it offers scores of features while simplifying your system by replacing loose relays and modules with programmable solid-state components that provide superior performance and long-term reliability.
The new mo.Ride phone app enables you to sync your phone with the mo.Unit Blue via Bluetooth® LE technology gives you access to scores of new features absolutely unique to this product. Not sure you want that level of connectivity? No problem, program and diagnose your mo.Unit manually just like the V.2
Perhaps our favorite feature is the Secure Encrypted “Keyless Go” function allowing you to turn on the ignition with a tap of the start button while your phone is in proximity like a modern luxury car, alternatively you can use your traditional key when your phone isn’t available.
FEATURES THAT DO NOT REQUIRE A SMARTPHONE AND THE MO.RIDE APP
- Complete digital control using buttons possible with 4 or 5-button operation.
- Complete replacement for the fuse box. 10 independent circuits are digitally monitored and switched off if there are faults. After the fault is rectified, the safety function is automatically reset.
- An integrated alarm system that can be installed in any position.
- Integrated, digital flasher relay that is load-independent; automatic switch-off optional and can be set; m.wave mode can be selected.
- Integrated hazard warning light.
- Turn signal can optionally be set as a positioning light.
- Integrated parking light and Hi-beam flashing.
- Lo-beam and Hi-beam (up to 200 W switched capacity) can be controlled using only one button.
- Integrated, digital brake light modulator; flashing mode can be programmed.
- Acceleration-controlled emergency brake light (automatic warning signal).
- Integrated starter relay for the starter system with solenoid (up to 30 A switched capacity).
- Intelligent and configurable management/switch-off of power-consuming devices so that the maximum starting energy from the battery can be used when starting the bike.
- Integrated, digital horn relay.
- Two configurable additional outputs AUX1 and AUX2.
- Diagnostics function for assigning inputs, outputs, the circuit switching status, short circuit diagnostics, etc.
- Current measurement enables faults to be detected on all lights such as headlights, turn signals, brake lights, etc.
FEATURES REQUIRING SMARTPHONE AND THE M.RIDE APP
- Encrypted connection via Bluetooth® LE (Low Energy) for manipulation protection and lower smartphone and m.unit blue energy usage.
- Keyless Go (the onboard electrical system is switched on when you approach the bike with your smartphone).
- Alarm events are sent via Bluetooth® to the App (with date, time, vehicle on the floor, etc.).
- Alarm system mode and sensitivity can be adjusted.
- The onboard voltage can be monitored in the App.
- Diagnostics on all inputs and outputs; current, voltage, and device temperature measurement.
- Real-time audio fault messages are issued via the helmet headset.
- Outputs can be switched manually via smartphone (except for starter).
- Firmware updates are provided anywhere via smartphone and App without removal.
- Setup menu can be configured anywhere via smartphone and App without removal.
- Speedometer input for comparing the vehicle mileage with m.ride can be used for vehicle management with automatic alerts for maintenance tasks, the condition of the tires, chain, brake pads, oil, operating fluids, spark plugs, etc.
- Logbook for recording journeys and displaying the vehicle status, alarm events, and maintenance tasks.
- Parking position display and Ping! for help locating the vehicle.
- LIN bus connection for connecting to compatible motogadget products at a later date.
DIMENSIONS AND SPECIFICATIONS
- L/W/H: 101 x 61 x 28 mm (4" x 2.4" x 1.1")
- Weight: approx. 180 g
- Mounting: 2 x M5 screws, stainless steel (mounting and ground terminal), 1 x M5 screw-on terminal for battery positive
- Operating voltage: 6V - 20V
- Operating temperature: -20 °C... +80 °C
INPUTS:
- 1 x input (+12V switched) for ignition lock or mo.Lock
- 11 x control pilot inputs (minus/ground, switched) for left turn signal, right turn signal, low beam/high beam, starter, horn, brake light, kill switch, kickstand switch, LIN-Bus, AUX1, and AUX2
OUTPUTS:
- 10 x Outputs (+12V) for left turn signal, right turn signal, Lo-beam, Hi-beam, starter, horn, brake light, ignition, AUX1, and AUX2
The m.ride App is now available for Android (from version 6.0) and for iOS (from iPhone 5). The modern Bluetooth® LE is used to couple the m.unit blue with the smartphone. This requires certain requirements for the smartphone’s hardware.
USER MANUAL available for download for the installation and use documentation.
- Motogadget mo.Unit Blue
- Revival Signature mo.Unit Wiring Kit
- Revival Signature Complete Wire Harness Loom Kit
Assembled specifically for the Motogadget mo.Unit, the Revival Cycles Deluxe Cable Kit includes the core materials necessary to construct a compact, custom wiring harness for use with the m-Unit. Automotive grade wires, ferrules, zip-ties, heat shrink, 5 pole Wago lever nut, and waterproof main fuse holder are all included in this kit.
- TXL cross-linked thin walled wiring meets SAE J1128 standards and offers protection superior to PVC varieties whether it be against heat, solvents or abrasion. The wire lengths included in the kit should more-than-suffice for running wires anywhere you'd need on your project, with varying gauges both capable of handling necessary electricity and compact enough for a clean, easy install.
- Ferrules provide protection to the wire terminations at the m-Unit.
- Dual wall heat shrink seals out moisture and protects the ferrule terminations from vibration fatigue.
- Wire ties can be used to secure your harness to your frame reducing chaffing from vibration.
- Marine grade Delphi Metri-Pack fuse housing provides the main fuse required between your charging system and battery.
- Wago5 pole Lever Nut allows you to connect up to 4 wires to the AUX 12V output.
From ferrule crimpers to wire loom Revival offers a broad selection of wiring components to help you to create a reliable harness rivaling what you might get from an OEM.
Ferrule Crimpers / Automatic Wire Strippers / U Crimpers / Vinyl Loom / Split Loom / Tesa Tape / Heat Shrink / Butt Connectors / Battery Cable Kit / Spark Plug Wire kit
Kit includes each of the following:
- 15 X Small Cable Ties
- 15 X Large Cable Ties
- 15 X Small Ferrules
- 15 X Large Ferrules
- 1 X Waterproof Main Fuse Holder
- 1 X Wago 5 pole Lever nut
- 6" X Black 1/8" Heat Shrink
Wire:
Use | Input / Output | Color | Wire Gauge | Length [Feet] |
AUX | Output | brown | 18 | 15 |
Ground | N/A | black | 12 | 12 |
Battery |
N/A |
red |
12 | 6 |
Starter | Output | light blue | 18 | 6 |
Right Turn Signal | Output | white | 18 | 12 |
Horn | Output | grey | 18 | 6 |
Left Turn Signal | Output | pink | 18 | 12 |
Headlight (Low) | Output | orange | 18 | 6 |
Headlight (High) | Output | dark blue | 18 | 6 |
Brake Lights | Output | purple | 18 | 6 |
Ground | Input | black | 22 | 15 |
Right Turn Signal | Input | white | 22 | 6 |
Starter | Input | light blue | 22 | 6 |
Horn | Input | grey | 22 | 6 |
Left Turn Signal | Input | pink | 22 | 6 |
Config. (Optional) | Input | green | 22 | 6 |
Headlight | Input | dark blue | 22 | 6 |
Brake Switch | Input | purple | 22 | 6 |
Lock Input | Input | brown | 22 | 6 |
TXL Cross-Linked Thin Walled Automotive Wire:
- Meets SAE J1128 Standards
- Temperature range -40° (-40°) - 257° (125°C)
- Single conductor, stranded, bare copper
- Insulated with Chemically cross-linked polyethylene
- Smooth surface finish
- Resistant to moisture, grease, oil, gasoline, most acids and solvents
- Superior abrasion resistance
Wago 5 Pole Lever Nut:
- Nominal Current: 20 A
- AWG: 24-12
- Rated voltage:600V
- Operating temperature: 220°F (105°C)
- cULus LISTED splicing wire connector file #E69654
- Shrinks to 1/2 the original size at 248°F (120°C).
Delphi 12033769 Metri-Pack 630 Series Female Connector:
- AWG: 14-12
- Metri-pack 630 sealed connectors exceed requirements for most marine, vehicle, heavy-duty mobile and industrial equipment applications.
Heat Shrink:
- Material: Polyolefin
- Shrink Ratio: 3:1
- Shrinks to 1/2 the original size at 248°F (120°C).
Protect your new wiring harness end to end from the elements, helping to ensure it has a long life and you spend more time on the road than you do on the side of it.
Included in the kit you’ll find PVC Vinyl Loom, Woven Split Loom, Double-walled, adhesive lined Heat Shrink and Tesa Fabric Tape.
When assembling this kit we took the average lengths we generally use on a build and added a few more feet of each just to be sure we've got you covered. But if your swinging from ape hangars or find another need additional Vinyl and Split loom can be purchased by the foot here in our store.
Our system incorporates Vinyl Loom for exposed areas to protect from weather, Split Loom under the tank and seat to allow for drainage with Tesa Tape at transitions from one Loom to another, as well as Heat Shrink at loom terminations. This arrangement can produce a harness that will keep the elements out but allow for drainage should water get in so that your harness isn’t steeping in it, allowing for slow absorption through the wire sheathing resulting in corrosion and increased wire resistance and electrical failure.
You can find descriptions for each material as well as lengths or quantities provided in the Details tab. Click on the Specs tab if you want to get nerdy on the specifics all of the classifications, as well as manufacturer approvals.
Vinyl Loom | |
Diameter | Length |
1/8in / 3.175mm | 5ft / 1.524m |
3/16in / 4.762mm | 6ft/1.8288 |
1/4in / 6.35mm | 6ft/1.8288 |
5/16in / 7.937mm | 3.5ft/1.0668 |
3/8in / 9.525mm | 5ft / 1.524m |
1/2in / 12.7mm | 4ft / 1.2192m |
5/8in / 15.87mm | 2ft / 0.6096m |
PVC vinyl tubing is made for automotive wiring and is what you often find on OEM motorcycle harnesses. It makes for a clean, tidy appearance of visibly exposed wiring while providing a high level of protection from the harsh environment your system will be exposed to. This PVC vinyl tubing is extremely flexible, liquid-tight, abrasion-resistant and meets VW-1 flammability along with UL type B standards which is why it’s the industry standard for motorcycle wiring harnesses.
Split Loom | |
Diameter | Length |
5mm | 5ft (3.048m) |
8mm | 3ft/0.9144 |
13mm | 2ft (0.6096m |
19mm | 2.5ft (0.762m) |
25mm | 2ft (0.6096m) |
Our Split Loom is an industrial-grade product approved for use by nearly every automotive manufacturer you can think of. The high-density flat-knit weave combination of PET monofilament and textured Multifilament won't unravel at the ends and provides superior abrasion resistance while it protects your wiring from fluids by allowing moisture to drain away. It is s the creme de la creme of harness solutions providing durable, heat resistant protection while being the easiest option to work with. No fishing wires down a tube, or tape wrapping; add, remove or inspect wiring without deconstructing your harness apart in the process. The high-density flat-knit weave combination of PET monofilament.
Tesa Tape | |
Length | 25 Meters |
Width | 19 MM |
Tesa Cloth Harness Tape is not your run of the mill electrical tape. The industrial-grade harness tape designed for use in the inhospitable environs of engine bays and is the very same tape used by Mercedes, VW and numerous other automotive manufacturers. Made from abrasion-resistant PET cloth and backed with an acrylic adhesive, this tape has high tensile strength and the adhesive will not turn to goo when exposed to heat or fuel. You can use this tape to wrap an entire harness and rest assured that it won't become a sticky dirty mess.
Dual-Wall Heat Shrink | |
Cut to 6" lengths | |
Diameter | quantity |
1/8" | 2 |
3/16" | 4 |
1/4" | 6 |
3/8" | 4 |
1/2" | 2 |
3/4" | 1 |
1" | 1 |
Polyolefin Dual-Walled Heat Shrink has a myriad of applications when wiring a bike. Heat shrink can be used for an added layer of protection from abrasion, chaffing, fatigue, and strain relief to the wire as well as joints and terminals. A Cross-linked treatment closes the pores in the PVC decreasing the ability for fluids to find a way in, the hot melt glue inner layer further seals out water, fuel, and solvents from entering from the sides and at the endpoints. Secure wire loom in its place while helping seal moisture out of PVC Vinyl Loom terminations.
Applications:
- In-line Splicing
- Terminal Sealing
- Strain Relief
- Mechanical Protection
- Connector Sealing
Vinyl Loom |
SPECS |
MIL-63ID specs |
VW-1 flammability standards |
UL type B ratings |
Max Temp 221° F (105° C) |
Min Temp -4°F (-20° C) |
Split Loom | |||
Physical Properties | Specification | Unit | Value |
Min/Max Continous Temperature | --------------- | F° (C°) | -40°/302°F (-40/150°C) |
Peak Temperature (240h) | --------------- | F° (C°) | 347°F (175°C) |
Melting Point | ISO 11357-3 | F° (C°) | 500°F (260°C) |
Abrasion Resistance | ISO 6722 SAE ARP 1536 A LV 312 RSA 36 05 035 B |
cycles | 6450 244714 2400 MG4 (C) |
Flammability | FMVSS 302 SAE J 369 |
mm/min --------- |
<100 self-extinguishing |
Chemical resistance | SAE J 2192 D7 1924 |
--------- | Resists the majority of chemicals and Automotive fluids (oils, coolant, battery acid, brake fluid, fuels, windshield washer...) |
Manufacturer Approvals: | |||
Direct | Christler, Ford, GM, Iveco/CNH, Jaguar/Landrover, Peugeot-Citrogen, Renault, Volvo, Toyota. | ||
Via Tier-1 | Honda, Mazda |
Dual-Wall Heat Shrink |
Standards and Certifications |
3:1 shrink ratio |
Shrink temperature: 90°C |
Continuous operating temperature: -55°C to 110°C |
UL 224, 125°C |
CSA C22.2 No.198.1 125°C |
AMD-DTL-23053/4, Class 3 |
UL/CSA approval |
Tesa Tape | |||
BACKING MATERIAL | PET CLOTH | ||
TOTAL THICKNESS | 10.23 MILS | ||
TYPE OF ADHESIVE | ADVANCED ACRYLIC | ||
ADHESION TO STEEL | 45.68 OZ/IN | ||
ELONGATION AT BREAK | 40 % | ||
TENSILE STRENGTH | 157.02 LBS/IN | ||
TEMPERATURE RESISTANCE MIN. | -40 °F | ||
TEMPERATURE RESISTANCE | (3000H): 302 °F | ||
ABRASION RESISTANCE | (10MM MANDREL): CLASS D (ACC. TO LV312) | ||
ABRASION RESISTANCE | (5MM MANDREL): CLASS D (ACC. TO LV312) | ||
FLAME RESISTANCE | CLASS B (ACC. TO LV312) | ||
UNWIND FORCE | (ROLL WIDTH > 9MM): 11 N/ROLL (30 M/MIN) | ||
NOISE DAMPING |
Reviews
