Motogadget mo.Switch Push-Button Housing

12 Reviews Sale price
/
Shipping calculated at checkout.

Color
Buttons
Bar Size

THESE ARE MOMENTARY SWITCHES, NOT LATCHING. THEY WILL NOT WORK FOR HEADLIGHTS,, TURN SIGNALS, KILL SWITCHES WITHOUT THE INCORPORATION OF A CONTROL MODULE IE: MO.UNIT, MO.RELAY+, NSC-01.

The mo.Switch (m-Switch) is a high-quality universal momentary push-button control for handle bars with *1 in. or 22 mm (7/8 in.) tube diameter in a plain and elegant design. These finely CNC-machined billet aluminum hand controls in combination with an electronic push-button control unit (not included) are used to operate all electrical features typically found on your handlebars: lights, turn signal, electric starter, horn, etc. 

These switches are available in a polished black or polished aluminum finish with either two-button or three-button arrangements. Due to their extremely compact design, it is simple to route more than one housing on either side of your bars, if necessary for your project. Also, feel free to mix-and-match finishes if you desire. Two flush built-in M5 stainless steel mounting screws ensure secure and stable clamping of the push-button control to all handle bars. 

The push-buttons are a high-quality, very robust design and vibration- and spraywater-proof (IP65). The appropriate size and ergonomic pressure point provide for a definite actuation sensing - even when operated with gloves. This feedback provides a strong tactile indicator that you've operated the switch.

Each push-button is equipped with two terminals for an easy optional circuit layout with only one or two cables. The internal ground terminal is already provided for the 'one cable layout'. Therefore, the routing of the cable inside the handle bar can be performed easily. 

The push-buttons are also available separately and can be replaced if damaged.

The mo.Switch is, of course, compatible with all common push-button controls, including the Motogadget mo.Unit.

Dimensions:

mo.Switch, aluminium casing; 2 high quality push-buttons per unit; 2x M5 stainless steel mounting screws; installation instructions

Reviews

Customer Reviews
4.8 Based on 12 Reviews
5 ★
83% 
10
4 ★
8% 
1
3 ★
8% 
1
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
SY
03/22/2021
Scott Y.

Works but could be better

Watch revivals review of these and listen to their advice. The Three button don’t close up nicely around the bars. Also the housing doesn’t have enough room inside to run the wire for the front button. I had to drill another hole in the bars to run a wire out the front side. Expected more from motogadget.

RA
03/03/2018
Rusty A.

Appears to be great quality

Appears to be great quality material. Clean and sharp look on the bars. I'm definitely happier with the look and function compared to stock control assemblies. I would have liked all three buttons on the same side, only negative.

TC
01/22/2018
Tony C.

Great design made for tight

Great design made for tight but functional fit. Ergo friendly controls. Looks great.

SG
01/17/2018
Sven G.

Motogadget M-Switch

Excellent product and I install in another bike a m-Unit and is great so i want to thank you when you help me with some wiring issue of the m-unit. Thanks a lot from Chile

JC
07/28/2017
James C.

motogadget switches

cheeper is not always better . If your building a bike save yourself some headaches and get these switches.

DH
02/02/2017
Doug H.

Very well made

Very well made

DM
09/25/2016
Don M.

Great setup if you need it!!

Well designed and build quality second to none.

SP
09/19/2016
Sergio P.

Good parts ,,but a too

Good parts ,,but a too expensive for the product.

JA
09/08/2016
John A.

Looks like quality

Have not got to the build in quite some time. Hope to get it done by spring. HA.

DM
01/21/2016
Dallas M.

m-Switch Push-Button Housing

Very clean looking and easy to install.


Touring the Ultimate Porsche Destination with Magnus Walker

DAILY NO. 125

From our customers

★★★★★

100% impressed over and over again by Jeff & Co at Revival. They’re patient and kind no matter the enquiry (currently resto-modding an R100/7 and have LOTS of questions about the Motogadget rewire) and go out of their way to offer creative solutions and out of the box thinking. I will forever return and recommend Revival.

Theo B.
North Vancouver, BC
★★★★★

I cannot recommend Revival Cycles enough. Not only do they have a great assortment of gear and accessories but they provide superb customer service. I was having some difficulty making it work... Jeff pointed out what I was missing and also provided schematics to make it work. Thank you guys very kindly, your crew rocks.

Svend P.
Santa Fe, NM

Recently viewed