Revival Signature Waterproof 4 Circuit Breaker / Relay / Fuse Block

7 Reviews Regular price $25.00
Shipping calculated at checkout.

Circuit Breaker or Fuses

Fuses went out of fashion in homes sometime around the 1950's in favor of the "modern" circuit breaker. The advantage of being able to reset a blown circuit without having to find a replacement fuse made it an easy decision to make the switch. With this Waterproof 4 Circuit Breaker / Relay / Fuse Block kit you can add this same level of convenience to your motorcycle.

If you have ever been on a ride well away from civilization and autoparts stores (usually where the best riding is found) and had your bike sputter to a halt with a blown fuse you know how frustrating it is to not have a spare. With circuit breakers you don't need to worry about a spare, if there is a fault, simply fix whatever caused it and the breaker will automatically reset. This feature can also be extremely helpful in debugging an intermittent wiring problem, because as you work your way through the loom when the problem is corrected the breaker resets itself letting you know you found the issue. Sounds too good to be true, right? But it actually works, and we prove it in our Tech Talk demo video!

This kit is based around a 3 circuit 100% waterproof fuse block that uses mini circuit breakers. It is pretty straight forward to replace the stock fuse block with this setup, just clip out the old block and connect the wires from either side of the fuse to the new circuit terminals. If you are new to the wires on your bike  its a good idea to do this one circuit at a time so the wires don't get crossed. But it really isn't that hard, especially on the older Honda's and Yamaha's which have notoriously bad fuse blocks. 

When you order you can pick the current ratings you need for your application, but REMEMBER, current rating is determined by the SMALLEST size of the wire used in the circuit, if you are not following the original fuse rating used in the stock fuse block you can use the table below as a guide for copper wire (tip: most bikes use 18-16 GA wire, but you should check for yourself).

Un-assembled: Comes as individual components so you can make a splice-free installation into your wire harness. (Note: The crimp terminals are open U / Double Barrel type and it is best to use an appropriate crimp tool; if you don't have one, we've got a good one that is inexpensive here. It is possible to get decent crimps with other tools, its not recommended, its a little frustrating, but if you are dedicated and operating on the cheap it can be done)

AWG Gauge #

Wire Dia
Maximum Current
20 .032 11
18 .040 16
16 .050 22
14 .064 32
12 .080 41
10 *** .102 55
8 *** .125 73
6 ***  .162 100
4 *** .204 13

 *** Not compatible with this kit, 12GA wire is the maximum for this housing, these sizes are included for reference only


Customer Reviews
4.3 Based on 7 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Brad Z.
United States

Never received

Given the amazing reputation of Revival, was really disappointed to never received any of my order, no follow up after multiple messages and credit card charged.

Anthony B.
United States United States

Go to for electrical protection!!

Does exactly as it should everything’s to be quality product! I own 4 bikes all are equipped and any customers bike gets one they are simple and flat out work!

Revival Cycles Revival Signature Waterproof 4 Circuit Breaker / Relay / Fuse Block Review
United States United States

Wiring upgrade

I used this along with a micro relay to get full power to coils removing voltage drop caused by old wiring on 78 GS1000. It worked so well I ordered them for a second time to use on a 1980 GS1100

lisandro j.
United States United States

Great company

Great customer service fast shipping great products %

lisandro j.
United States United States

Great company

Great company Great products very responsible fast shippers

Brett C.

Please include a few extra crimp connectors? They're tiny and fragile - easily boogered during install. They're also very inexpensive!! - Hey Brett, we actually do include a couple of extra terminals for this very reason.

Christian A.

Easy, reliable, worth it

If you need a waterproof housing and customizing a motorcycle this is a great product. It feels great and comes with everything you need. I ordered extra terminals just Incase too. Nice pieces 10/10 recommend

Touring the Ultimate Porsche Destination with Magnus Walker


From our customers


100% impressed over and over again by Jeff & Co at Revival. They’re patient and kind no matter the enquiry (currently resto-modding an R100/7 and have LOTS of questions about the Motogadget rewire) and go out of their way to offer creative solutions and out of the box thinking. I will forever return and recommend Revival.

Theo B.
North Vancouver, BC

I cannot recommend Revival Cycles enough. Not only do they have a great assortment of gear and accessories but they provide superb customer service. I was having some difficulty making it work... Jeff pointed out what I was missing and also provided schematics to make it work. Thank you guys very kindly, your crew rocks.

Svend P.
Santa Fe, NM

You may also like

Recently viewed