Hopkins Integrated Run/Brake/Turn Module

From time to time we get an inquiry regarding how to program the mo.Unit so that you can have two lights that act as running, brake and turn signal indicators which is a feature seen on many Harley models. No LED can do this on its own and a module of some kind is necessary to do it. The mo.Unit also does not have this capacity but can be integrated with a module that does. 

There are a lot of motorcycle modules available to do this but most are in the $50-100 range and we've found that you can achieve the same results using a simple Hopkins 48895 Trailer Light adapter that is available all over the web and run you as little as $17. 

Click the photo to open the full PDF.

Hopkins Integrated Run/Brake/Turn Module


  • Revival Tech Support

    Hey Randy,

    It will most definitely work! We recommend following the diagram linked above in the photo. Let us know if we can help with anything else.

    Guide – https://cdn.shopify.com/s/files/1/0072/8562/files/Hopkins_RUN_BRAKE_TURN_DIAGRAM.pdf?v=1628813853

  • Randy

    i have mo unit blue with 3 wire led taillights. Can i use the hopkins 48895 tail light converter to make run/ break/ turn work correctly
    I have the 1 wire taillight feature enabled. Thanks

Leave a comment

Please note, comments must be approved before they are published