Revival Signature DIY Cloth Battery Cable Kit

3 reviews Regular price $58.00
/
Shipping calculated at checkout.

At this wires core is a fine braided Class K copper wire that is soft and flexible allow for easy routing, coated in a layer of soft PVC that is wrapped in a lacquer impregnated cotton braid. The kit includes quality tin-plated solid copper eye terminals in two sizes, the right solder for assembly and two colors of dual wall self-sealing heat shrink to seal out moisture. This combination provides superior electrical conductivity, reduces voltage drop, and is physically stronger than most OEM cables.

Package
Length
This attractive braided cable doesn't need to be hidden and communicates that you understand that it's the small details that set a one bike apart from another. 

Few motorcycles are built with longevity in mind wiring has always been where OEM's could save a bit by cutting corners by using low quality materials, minimal coil windings and cheap terminals. By now 20+ year old wiring is plagued with corrosion at the connectors that creeps up the sheathing compromising the integrity of your electrical system with increased resistance and voltage drop.

We've created two kits to choose from: one kit with black wire and one kit with red wire.

If you don't want to call attention to the cable as it routes through the bike you might use the black cabling and the heat shrink to indicate positive polarity cable at the hidden end at the battery terminal or similarly if you're only working with the red cable and just need a bit of cable for your chassis ground you can use the included black heat shrink to designate polarity.

Features:
  • High quality, fine-stranded copper core
  • Cotton braid w/ lacquer outer sheathing over PVC insulation
  • Two sizes of terminals to fit common battery and solenoid posts
  • Tin plated solid copper terminals
  • Flux core solder to ensure a solid connection
  • Heat shrink is dual layer with self sealing adhesive to protect solder joint
Specifications:
  • 24" of 6 AWG / 13.5mm2 (either black or red)
  • 266/30 Copper stranding
  • 60 to 220 degrees F (- 50 to 100 Degrees C)
  • Terminals: Qty. 2 each 1/4" and 5/16"
  • diameter 6 gauge tin plated solid copper eyes
  • 24" (600mm) of 0.062" diameter 3% flux core electrical solder Sn60/Pb40
  • 6" (150mm) each of red and black dual wall polyolefin heat shrink with 3:1 shrink ratio
 

Reviews

Customer Reviews
4.7 Based on 3 Reviews
5 ★
67% 
2
4 ★
33% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JJ
03/18/2021
Justin J.

Battery cable kit

Great kit, used it to make custom cables for my rigid sporty project. Just bought another kit for the next project. Thanks for making quality stuff.

CP
02/07/2021
Casey P.

I need to know...What do these guys eat for breakfast in the morning?

Next level Knowledgeable crew and brilliant business structure providing wisdom and the right parts to fix up your ride. 5 stars. Check out YouTube..These guys are rockstars!

JJ
09/11/2020
Justin J.

Battery cable kit

Great kit, worked perfectly for my hardtail project.


Touring the Ultimate Porsche Destination with Magnus Walker

DAILY NO. 125

From our customers

★★★★★

100% impressed over and over again by Jeff & Co at Revival. They’re patient and kind no matter the enquiry (currently resto-modding an R100/7 and have LOTS of questions about the Motogadget rewire) and go out of their way to offer creative solutions and out of the box thinking. I will forever return and recommend Revival.

Theo B.
North Vancouver, BC
★★★★★

I cannot recommend Revival Cycles enough. Not only do they have a great assortment of gear and accessories but they provide superb customer service. I was having some difficulty making it work... Jeff pointed out what I was missing and also provided schematics to make it work. Thank you guys very kindly, your crew rocks.

Svend P.
Santa Fe, NM

Recently viewed