Vape Suzuki GT/T with PEI

Vape Charging & Ignition System for Suzuki GT/T Twins with PEI/CDI Ignitions

Regular price $502.19
/
Shipping calculated at checkout.

Vape ignitions are made to order and depending on availability, delivery times may be 4-8 weeks.

Upgrade your old Suzi electrical system with a powerful, modernized, all-in-one solution. No more ignition tuning or getting stranded from a weak battery. You'll have brighter lights, and fewer fouled plugs; this system is set-and-forget. You could even run with no battery at all. 

There is a lot of confusion around the differences between whether some models are Ts or GTs. In this instance, it doesn't matter so long as your bike has their PEI ignition, which was Suzuki's name for a CDI at the time. 

The Vape charging system comprises a 12 Volt 180 Watt single-phase permanent magnet alternator (PMA) and a Revival exclusive regulator/rectifier compatible with lithium-ion, AGM, and lead-acid batteries. This system provides a considerable voltage increase at low RPMs, meaning you're reaching charge voltages sooner and not just relying on your battery voltage in stop-and-go traffic. The ignition system produces its own power, so the stator only needs to maintain voltage for the starter and lighting. 

Vape ignition systems use capacitive discharge (CDI) tech to produce fat, blue ignition sparks that improve fuel combustion and inhibit plug fouling regardless of available battery voltage. The system includes coils, wires, caps, and an ignition module that replaces the old mechanical advance with an electronic advance with two or more curves to select from. 

Here is the essential reading!

Vape ignitions are made to order; depending on availability, delivery times may be 4-8 weeks.

Make sure you have selected the correct system for your make and model. If you have any questions, please reach out to us before checkout. Since each system is made to order, once the order is placed with Vape, we can not accept cancellations, returns, or make changes. 

CLICK THIS LINK FOR GUIDANCE ON FITMENT AND INSTALLATION. 


More tips!

  • Be sure to revisit the link to the Vape installation guide provided near the bottom of our product page for this specific kit. 
  • If you are installing this system on a kick-start-only bike, you may be able to replace your battery with a Bat-Pac Battery Eliminator.
  • You can integrate Vape systems with the Motogadget mo.Unit for a 100% modernized electrical system on a vintage bike. 
  • Pay particular attention to the instructions regarding tightening all of the screws on the ignition. They are finger-tight from the factory. We recommend using a blue thread locker on all hardware to eliminate any possible backout from vibration.  
  • Vape kits do not come with a woodruff key slot. We hear concerns about this from time to time. We use these on our own projects and in all the years we've sold these, we've never seen a single issue. Many bikes don't use keys, and a correctly installed rotor doesn't need one. Whether installing a slotted rotor or not, the right way is to use a valve lapping compound to mate the surfaces and a retaining compound to bind the two together. 

 

  • stator unit
  • rotor
  • regulator/rectifier
  • electronic advance unit CDI (""Black Box"")
  • twin ignition coil with wires and caps
  • relay with cables
  • fastening hardware
  • cables
  • cable ties
  • rotor puller tool

Reviews


Touring the Ultimate Porsche Destination with Magnus Walker

DAILY NO. 125

From our customers

★★★★★

100% impressed over and over again by Jeff & Co at Revival. They’re patient and kind no matter the enquiry (currently resto-modding an R100/7 and have LOTS of questions about the Motogadget rewire) and go out of their way to offer creative solutions and out of the box thinking. I will forever return and recommend Revival.

Theo B.
North Vancouver, BC
★★★★★

I cannot recommend Revival Cycles enough. Not only do they have a great assortment of gear and accessories but they provide superb customer service. I was having some difficulty making it work... Jeff pointed out what I was missing and also provided schematics to make it work. Thank you guys very kindly, your crew rocks.

Svend P.
Santa Fe, NM

EXPERT TECH SUPPORT

NEED SOME TECHNICAL HELP?

We don't just want the sale. Revival's team is here to support you through your buying process to ensure you have exactly what you need when working on your bike. Our technical support team is happy to help!

CONTACT US

You may also like


Recently viewed