Cake Bikes have taken motorcycle riding in a whole new direction through their development of an electrical drive train, resulting in an incomparable performance dual-purpose ride.
Weight:
Dry 52kg + battery 17kg
Speed & Range:
- Top speed: +80km/h / +50mph
- Range: Trail/Enduro: up to 3 hours
- The actual range depends on a number of different aspects, e.g. riding style, rider weight, weather conditions, temperature, road surface and tire pressure.
Drivetrain:
- 11kW motor
- 42 Nm peak torque on shaft / 280Nm on wheel
- Front sprocket 12 teeth
- Rear sprocket 80 teeth
- Chain size 420 O-ring
Battery:
- 18650 lithium cells
- 51.8 Volt
- 50 Ah
- 2.6 kWh
Dashboard & Controller:
Configured for 3 riding modes:
-
Explore: The ultimate mode during exploration. Limited speed to 45 km/h and 3-4h+ battery range
-
Excite: Enduro or active trail riding. 1-2 h riding time
-
Excel: Track and race mode, maximal torque and speed, riding time up to 1h
- 3 brake settings; freewheel, 2-stroke & 4-stroke.
- Temperature indicator.
- Thank you Semcon and Garmin for the inspiration.
Charging:
- 0-80% takes 1,5 h to charge in a standard outlet
- 0-100% takes 2,5 h to charge in a standard outlet
Frame:
- 6061 aluminium, extruded, forged and CNC jointed and welded
- Body Carbon fibre reinforced PC
- Swing arm 6061 aluminium extruded tube profile with linkage
Front suspension:
The upside down fork is air/oil sprung and features 38mm stanchion tubes for extra rigidity and strength, with 204mm travel, specially developed by Öhlins. Adjustable for high-speed compression, low-speed compression and low-speed rebound. The forks are equipped with Öhlins advanced 3 stage air springs with individual setup for ride heights and bottoming resistance.
Rear suspension:
205 mm. Öhlins TTX22 with CAKE internals and specific spring. Designed with linkage for best performance
Head angle / Fork angle:
25° fork angle
Wheel base:
1 310 mm
Seat height:
910 mm (unloaded)
Ground Clearance:
300 mm
Trail and offset:
87,4 mm of trail
22 mm offset in triple clamps
36 mm offset in forks
Brakes:
Motorcycle standard, four pistons callipers, alloy levers and 220 mm/3.2 mm stainless steel rotors
Cockpit:
Handlebar
Aerospace grade 7050 aluminium, 800 mm wide, 20 mm rise, 31.8 mm
Stem:
Aerospace grade 7075 aluminium stem with integrated dashboard
Headset:
FSA Stainless steel
Seat:
Developed by Reconsider©
Wheels and tires:
- Enlarged 25 mm stainless steel axles
- Aerospace grade 7075 Power hubs
- 24 inch/50 mm 6061 alloy, triple chamber rims.
- 24 inch specially developed tires for durability and minimum trail wear
Fenders:
- All fenders and side plates are made of PC/ABS
- All bearings throughout the bike are SKF´s
*Note that all specs are subject to changes
