Revival Signature Universal Brake & Clutch Cable Kit

10 reviews Regular price $34.00
/
Shipping calculated at checkout.

Our Signature Universal Brake & Clutch Cable Kit contains all the necessary components to help you build your own high quality cable.

Finish
Brake and Clutch levers are not all alike and any time you're installing an aftermarket cable pull brake or clutch perch you'll almost certainly have to build a new cable to go with it.
 
We've collaborated with the experts at Venhill Engineering to develop a kit to service all of the levers available here on our site as well as nearly any other lever you might come across.
 
Each kit provides enough material to build a single cable along with with a selection of ferrules, elbows, adjusters a variety of the most common nipples with a spare of each in case you need a do over.
 

Highlights:

  • Black or Clear Braided cable housing to match our Hydraulic Brake Lines and Fittings.
  • Spiral wound steel conduit covered in tough PVC.
  • Smooth action Teflon liner.
  • Galvanized steel cable for easy soldering and durability.
  • A torch and basic soldering tools required for assembly. Don't forget to check out our Control Cable Bird Cage Tool!

Each kit includes:

  • 1.35 meters (4.4 feet/4 feet 4.8 inches/54.8 inches) of 8mm OD braided PVC coated, spiral wound, Nylon lined outer conduit
  • 1.6 meters (5.25 feet/5 feet 3 inches/63 inches) of 2mm OD galvanized steel wire (1 x 19 strand)
  • 2 x ferrule, 7mm OD nose
  • 2 x ferrule, 7mm OD nose
  • 1 x neoprene adjuster boot
  • 2 x brass barrel nipple, 8mm DIA x 9mm
  • 2 x brass barrel nipple, 6mm DIA x 10mm (2.1mm bore)
  • 2 x brass trumpet nipple, 6mm -> 3.5mm OD, 2.5 ID, 9.5mm length
  • 2 x brass bar nipple 10mm DIA x 10mm, slotted
  • 1 x N8 nylon nipple sleeve, 8mm OD
  • 1 x N10 nylon nipple sleeve, 3/8" OD
  • 1 x Accordion Adjuster Boot
  • 1 x BMW clutch cable fitting
  • 1 x Lock nut M8 x 1.25mm
  • 1 x Steel adjuster screw M8 x 1.25 x 42mm
 
 

Reviews

Customer Reviews
4.9 Based on 10 Reviews
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
B
04/17/2021
Bryan
very nice

works great

B
04/16/2021
BRYAN
very nice

wORKED REALLY GOOD

N
03/17/2021
Nicolas
fully satisfied

it was perfect and easy to use

F
02/17/2021
Fidencio
Clutch cable kit

If your building a custom bike revival is the site you want to definitely bookmark and subscribe to their YouTube Channel. That being said this cable kit and the How To video on YouTube made the job a breeze, Ii felt like I was a pro in the end and should quite my job and pursue my dreams of Austin bike building like Revival. Just kidding on the dreams but this is how good their product and informational videos are. In real life I bought an OEM cable and modified it. It was way too long and didn’t mate up well to the lever. Second attempt I bought an OEM cable for the transplanted lever and the cable was too short by a couple of inches. Third time was the charm. I bought this kit from Revival and cut to a perfect custom length and all the fittings provided mates up to the lever and clutch arm perfectly. Now I have a clean looking and most importantly properly functioning clutches cable.

J
01/05/2021
JD
Universal Clutch Cable Kit

This was just as advertised. It came with a lot of choices on the connection points, and luckily, it came with 2 of the same ball joint tip because i soldered it on and then realized i forgot to put the connection bolt on first, also again, luckily, i was about a 1/2" too long on my measurement, so i was able to cut the tip off, put a new one on and install it on my bike. Looks to be very strong and I am thankful for the extra parts. Good job guys!

DM
12/10/2020
Dead M.
Universal clutch cable kit

It's great for what it is. Reasonably easy work of you are up for it. Fair warning ⚠️ not for use on Sportsters or any other bike where the cable enters the case below the fluid line without additional parts/fabrication.

DM
10/02/2020
Dead M.
Universal clutch cable kit

2 issues... 1 "universal"does not include HD sportster ... No biggie... I can make it work. 2 solder less ends definitely required solder but the coating on the cable itself makes this a real P.IA. In short... Good enough for 95% of users 95% of the time.

C
09/24/2020
Cael
Clutch cable kit

This kit worked great, tons of fitting options you can make it work with literally anything, great product

K
03/17/2020
Keith
Clutch cable

Great quality part

J
12/10/2019
John
Used this product

Made a clutch cable for my 2019 Raptor 700RSE. I love this product it came with all I needed and some. Worked perfectly highly recommend this.


Revival Birdcage BMW R18

Build Bio

From our customers

★★★★★

100% impressed over and over again by Jeff & Co at Revival. They’re patient and kind no matter the enquiry (currently resto-modding an R100/7 and have LOTS of questions about the Motogadget rewire) and go out of their way to offer creative solutions and out of the box thinking. I will forever return and recommend Revival.

Theo B.
North Vancouver, BC
★★★★★

I cannot recommend Revival Cycles enough. Not only do they have a great assortment of gear and accessories but they provide superb customer service. I was having some difficulty making it work... Jeff pointed out what I was missing and also provided schematics to make it work. Thank you guys very kindly, your crew rocks.

Svend P.
Santa Fe, NM

EXPERT TECH SUPPORT

NEED SOME TECHNICAL HELP?

We don't just want the sale. Revival's team is here to support you through your buying process to ensure you have exactly what you need when working on your bike. Our technical support team is happy to help!

CONTACT US

Recently viewed