Revival Cycles has assembled unequivocally the most complete starter solenoid kit available anywhere on the market. With this special bundle offer, you will get everything you need to replace an old, worn-out solenoid on your existing build or a mo.Unit installation.
Starter Solenoid Specifications:
THIS KIT ONLY WORKS ON BIKES WITH STARTER SOLENOIDS INDEPENDENT OF THE STARTER. NOT INTENDED FOR HARLEY'S, MOTO GUZZI'S, OR BMW'S WITH INTEGRATED STARTER SOLENOIDS.
Revival Cycles has assembled unequivocally the most complete starter solenoid kit available anywhere on the market, providing everything you need to replace an old worn solenoid on an existing system or m-Unit installation.
The incorporated fuse circuit makes for a compact footprint making for less clutter and cleaner wiring, ideal for m-Unit installations.
The waterproof connector keeps your contacts dry and corrosion-free.
The mounting tabs included can be bolted to the frame or welded as desired.
For convenience, we've included a wide selection of fuses.
Concise instructions with a wiring diagram eliminating the guesswork.
A wiring diagram along with concise instructions eliminate the guesswork and make installation a snap.
Included with Product:
1 x Starter Relay
2 x Mounting Tabs
1 x Waterproof Connector
6 x Terminals
5 x Wire Seals
1 x Fuse Covers
2 x 10 Amp Fuse
2 x 15 Amp Fuse
2 x 20 Amp Fuse
2 x 30 Amp Fuse
DIY Battery Cable Kit Specifications:
It’s easy to overlook the little things, but the truth is that most OEM battery cables are not particularly well made. Many OEMs (even Ducati) use cheap steel crimp terminals and coarse wire stranding, making the cables both miserable to work with and bad at functioning appropriately. At Revival, we’ve sourced high-quality components and materials to develop a special DIY battery cable kit you can build yourself to fit your machine perfectly.
The backbone of these kits is very finely braided Class K stranded copper wire, which is soft and flexible, making it easy to route and bend. We combine this premium wire with high-quality tin-plated solid copper eye terminals, provide enough of the correct type of solder, and include self-sealing heat shrink to keep the moisture out. This combination gives fantastic electrical conductivity, reduces voltage drop, and is physically stronger than most OEM cables.
Because we use these kits on all of our bikes, we’ve set them up in two different configurations: one kit with black wire, one kit with red wire.
For projects with an exposed battery cable, we generally recommend using the black cable to avoid having a distracting red wire running through the lines of the bike, then marking the hidden end of your battery cable with a short length of red heat shrink to note correct polarity. Conversely, maybe you just need to hide a little bit of positive cable, so you can cover the need-to-hide section of cable with black heat shrink but use red wire to indicate positive polarity. Whatever you decide, we include both red and black heat shrink in both kits.
We have also discovered that there are different needs for the insulation, depending on the install. If you need the absolute minimum diameter to sneak through a tight space, use the thinner black cable. On the other hand, if you need extra abrasion resistance to prevent a short circuit from wearing on the battery cable, you can use the thicker red cable. We’ve chosen the red wire to have the tougher and thicker insulation because it is typically the positive terminal and the frame is ground, whereas the black cable is typically the ground wire, and generally not as critical.
High quality finely stranded copper core
Red wire: Dual jacket insulation, waterproof TPE inner, and Neoprene outer
Black Wire: Ultra-thin and durable EPDM insulation
Two sizes of terminals to fit common battery and solenoid posts
Tin plated solid copper terminals
Flux core solder to ensure a solid connection
Heat shrink is dual-layer with self-sealing adhesive to protect solder joint
Included with Product:
2’ of 6 AWG / 13.5mm2 (either black or red)
266/30 Copper stranding
-60 to 220 degrees F (- 50 to 100 Degrees C)
Black wire - approximately 0.335” (8.5mm) Diameter EPDM insulation resists cuts, tears, abrasion, grease, oil, water, and flame
Red Wire - approximately 0.395” (10mm) Diameter dual jacket insulation with TPE inner and Neoprene outer resists cuts, tears, abrasion, grease, oil, water, and flame
This is a great kit. You're kinda limited on the cable routing. This could be helped by including 2 flag connectors in the kit. The brackets work great. I trimmed mine so I could point the ears inward, and riveted them in place. This hides the fasteners.
100% impressed over and over again by Jeff & Co at Revival. They’re patient and kind no matter the enquiry (currently resto-modding an R100/7 and have LOTS of questions about the Motogadget rewire) and go out of their way to offer creative solutions and out of the box thinking. I will forever return and recommend Revival.
North Vancouver, BC
I cannot recommend Revival Cycles enough. Not only do they have a great assortment of gear and accessories but they provide superb customer service. I was having some difficulty making it work... Jeff pointed out what I was missing and also provided schematics to make it work. Thank you guys very kindly, your crew rocks.
Santa Fe, NM
EXPERT TECH SUPPORT
NEED SOME TECHNICAL HELP?
We don't just want the sale. Revival's team is here to support you through your buying process to ensure you have exactly what you need when working on your bike. Our technical support team is happy to help!