Revival Signature DIY Battery Cable Kit

16 reviews Regular price $25.00
Shipping calculated at checkout.

At Revival, we’ve sourced high-quality components and materials to develop a special DIY battery cable kit you can build yourself to fit your machine perfectly.

It’s easy to overlook the little things, but the truth is that most OEM battery cables are not particularly well made. Many OEMs (even Ducati) use cheap steel crimp terminals and coarse wire stranding, making the cables both miserable to work with and bad at functioning appropriately. At Revival, we’ve sourced high-quality components and materials to develop a special DIY battery cable kit you can build yourself to fit your machine perfectly.

The backbone of these kits is very finely braided Class K stranded copper wire, which is soft and flexible, making it easy to route and bend. We combine this premium wire with high quality tin-plated solid copper eye terminals, provide enough of the correct type of solder, and include self-sealing heat shrink to keep the moisture out. This combination gives fantastic electrical conductivity, reduces voltage drop, and is physically stronger than most OEM cables.

Because we use these kits on all of our bikes, we’ve set them up in two different configurations: one kit with black wire, one kit with red wire.

For projects with an exposed battery cable, we generally recommend using the black cable to avoid having a distracting red wire running through the lines of the bike, then marking the hidden end of your battery cable with a short length of red heat shrink to note correct polarity. Conversely, maybe you just need to hide a little bit of positive cable, so you can cover the need-to-hide section of cable with black heat shrink but use red wire to indicate positive polarity. Whatever you decide, we include both red and black heat shrink in both kits.

We have also discovered that there are different needs for the insulation, depending on the install. If you need the absolute minimum diameter to sneak through a tight space, use the thinner black cable. On the other hand, if you need extra abrasion resistance to prevent a short circuit from wear on the battery cable, you can use the thicker red cable. We’ve chosen the red wire to have the tougher and thicker insulation because it is typically the positive terminal and the frame is ground, whereas the black cable is typically the ground wire, and generally not as critical.


  • High quality finely stranded copper core
  • Red wire: Dual jacket insulation, waterproof TPE inner, and Neoprene outer
  • Black Wire: Ultra thin and durable EPDM insulation
  • Two sizes of terminals to fit common battery and solenoid posts
  • Tin plated solid copper terminals
  • Flux core solder to ensure a solid connection
  • Heat shrink is dual layer with self sealing adhesive to protect solder joint

Included with Product:

  • 2’ of 6 AWG / 13.5mm2  (either black or red)
  • 266/30 Copper stranding
  • -60 to 220 degrees F (- 50 to 100 Degrees C)
  • Black wire - approximately 0.335” (8.5mm) Diameter EPDM insulation resists cuts, tears, abrasion, grease, oil, water, and flame
  • Red Wire - approximately 0.395” (10mm) Diameter dual jacket insulation with TPE inner and Neoprene outer resists cuts, tears, abrasion, grease, oil, water, and flame
  • Terminals: Qty. 2 each 1/4” and 5/16”
  • diameter 6 gauge tin plated solid copper eyes
  • 2’ (600mm) of 0.062” diameter 3% flux core electrical solder Sn60/Pb40
  • 6” (150mm) each of red and black dual wall polyolefin heat shrink with 3:1 shrink ratio 


Customer Reviews
4.9 Based on 16 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Jeffrey H.
United States United States

Revival Signature DIY Battery Cable Kit

So my use of the kit is unique. I am wiring a Sand Rail Dune Buggy so the kit really did not fit my need. With that being said, the kit would be perfect if I were needing to wire a motorcycle because it includes all the parts to connect to a battery. This is a hands on learning project. In my situation I did not need the heavy gauge wiring when I thought I did. When I am finished with the wiring of signal lights I will post images.

Tayson R.
United States United States


I am excited to have a high quality & flexible battery cable.


Revival Cycles Battery Cable Kit

Everything that I have got from revival is just what they said it was !!! That's a good thing



Very flexable just what I needed for my electric start conversion on my 1964 panhead.

Richard R.

top quality...

top quality kit that worked like a champ!

Fred c.

Battery cable kit

Really high quality product that helped me route the old battery cables on an old softail. If you've worked on these trying to resend the stock cable in such tight spaces is a pain. These flexible cables were perfect. Thanks guys.


Battery cables made easy

The thing that made this kit so awesome and easy was the how-to video. The quality of the cable and included pieces was well thought out too.

Mike h.


Awesome stuff! Wish it included the ground wire also.

Gene S.

Worked great, good quality

A good choice for a replacement on a vintage bike. Would suggest also selling them with choice of ends pre-soldered at custom length.

Abdulrahman R.

Positive cable

High quality product

Touring the Ultimate Porsche Destination with Magnus Walker


From our customers


100% impressed over and over again by Jeff & Co at Revival. They’re patient and kind no matter the enquiry (currently resto-modding an R100/7 and have LOTS of questions about the Motogadget rewire) and go out of their way to offer creative solutions and out of the box thinking. I will forever return and recommend Revival.

Theo B.
North Vancouver, BC

I cannot recommend Revival Cycles enough. Not only do they have a great assortment of gear and accessories but they provide superb customer service. I was having some difficulty making it work... Jeff pointed out what I was missing and also provided schematics to make it work. Thank you guys very kindly, your crew rocks.

Svend P.
Santa Fe, NM



We don't just want the sale. Revival's team is here to support you through your buying process to ensure you have exactly what you need when working on your bike. Our technical support team is happy to help!


Recently viewed